/*
* File: Clock_lcd.c
* Author: PhanHoangThinh
*
* Created on Ngày 26 tháng 6 n?m 2017, 15:15
*/
#include <xc.h>
#include <htc.h>
#include <stdio.h>
#include <stdlib.h>
#include "lcd.h"
#define _XTAL_FREQ 4000000
// CONFIG1
#pragma config FOSC = HS // Oscillator Selection bits (HS oscillator: High-speed crystal/resonator on RA6/OSC2/CLKOUT and RA7/OSC1/CLKIN)
#pragma config WDTE = OFF // Watchdog Timer Enable bit (WDT disabled and can be enabled by SWDTEN bit of the WDTCON register)
#pragma config PWRTE = OFF // Power-up Timer Enable bit (PWRT disabled)
#pragma config MCLRE = ON // RE3/MCLR pin function select bit (RE3/MCLR pin function is MCLR)
#pragma config CP = OFF // Code Protection bit (Program memory code protection is disabled)
#pragma config CPD = OFF // Data Code Protection bit (Data memory code protection is disabled)
#pragma config BOREN = OFF // Brown Out Reset Selection bits (BOR disabled)
#pragma config IESO = OFF // Internal External Switchover bit (Internal/External Switchover mode is disabled)
#pragma config FCMEN = OFF // Fail-Safe Clock Monitor Enabled bit (Fail-Safe Clock Monitor is disabled)
#pragma config LVP = OFF // Low Voltage Programming Enable bit (RB3 pin has digital I/O, HV on MCLR must be used for programming)
// CONFIG2
#pragma config BOR4V = BOR40V // Brown-out Reset Selection bit (Brown-out Reset set to 4.0V)
#pragma config WRT = OFF // Flash Program Memory Self Write Enable bits (Write protection off)
// #pragma config statements should precede project file includes.
// Use project enums instead of #define for ON and OFF.
unsigned int phut=32;
int day=10;
int gio=16;
void main(void)
{
char s[10];
lcd_init();
while(1)
{
lcd_gotoxy(1,0);
lcd_puts(" DIGITAL CLOCK");
sprintf(s,"%u",(gio/10));
lcd_gotoxy(5,1);
lcd_puts(s);
sprintf(s,"%u",(gio%10));
lcd_gotoxy(6,1);
lcd_puts(s);
lcd_puts(":");
sprintf(s,"%u",(phut/10));
lcd_gotoxy(8,1);
lcd_puts(s);
sprintf(s,"%u",(phut%10));
lcd_gotoxy(9,1);
lcd_puts(s);
lcd_puts(":");
sprintf(s,"%u",(day/10));
lcd_gotoxy(11,1);
lcd_puts(s);
sprintf(s,"%u",(day%10));
lcd_gotoxy(12,1);
lcd_puts(s);
day++;
__delay_ms(1000);
if(day==61)
{
phut++;
day=0;
}
if(phut==61)
{
gio++;
phut=0;
}
if(gio==24)
{
gio=0;
}
}
}